30" Round Cocktail Table, Sealed Plywood, Steel EdgeAdjusts to 30", 36" and 42"
Plywood Tops shall be constructed of solid, ¾" thick, AC grade, 7 ply, exterior glue plywood. The top surface is to be finished with a walnut stain and then sealed with two coats of clear lacquer to resist moisture. Edges are to be protected by an 18 gauge, galvanized steel angle which shall be secured with screws from the underside of the table top and placed at intervals not to exceed 10". Edging must fit flush with the table top. Edging joints shall be welded.
Adjustable pedestal base, made of four, 14 gauge steel legs welded to a 12 gauge tapered hub shall support a two-piece column with three position, telescoping, vertical adjustment. The lower column shall be 1¾" dia. - 14 gauge steel with a tapered end that fits securely into the tapered hub of the base. The lower column shall be fitted with a spring-bolt lock that provides positive positioning of the upper column. The upper column shall be of 2¼" dia. - 14 gauge steel and are to be equipped with a locking knob having a 3/8" dia. threaded stud. The top of the upper column shall be capped with a 7" x 7" - 12 gauge steel mounting flange. The mounting flange shall slide into a mounting bracket anchored to the tabletop and is to be secured with a single hand knob.